Sunday, 25 October 2020

Crealies - Slimline Holiday Card..

Hello Everyone,

I'm at Crealies with this cute Penguin Holiday card using Crealies new slimline dies. It's so much fun to make slimline cards.. Isn't it??? I really enjoyed making this one using just the dies.. yes you heard it right.. Just dies....'No Stamping'  ;). 


To make this card, I first die cut out white card stock using innermost slimline die and distress inked it. Sprinkled it with water and also with white acrylic paint to give the effect of snow.


After that I die cut out 4 penguins using Partzz penguin builder dies on black and white card stock, colored the beak and feet with orange color and assemble it. Once satisfied, adhered the same on the inked background as shown in the pic using foam tape. I cut the extra part of the penguins which was coming out of the panel using scissors.


Then, I glued the die cut out sentiment to complete the front panel which I layered on another die cut out white panel using second layer of slimline dies. Finally I adhered it on white card base where I inked the edges using same color to match it with the front panel. Voila!!! our slimline holiday card is ready :).

I hope you get inspired.

Thank you so much for stopping by!!

Hugsxx
Deepti Aggarwal

I have used following Crealies products:

Crealies Dies / Stansen:
                 
   
Stamping cardstock, white 240 grams (20x A4)

Sunday, 18 October 2020

Kinda Cute by Patricia - Bee Merry!!

Hello Everyone,

Here I'm stopping by to share my DT Post for Kinda Cute by Patricia. For my card I have used this cute digi set called Santa Bee and made this Christmas card for my stash.

Over to my card..


To make this card, I took A2 size white card stock and stenciled it using Honeycomb Delight - ARTplorations Stencil  with distress oxides and then ink smooshed it too to add some interest.


Meanwhile I colored this cute images with Gansai Tambi Watercolors,  fussy cut it and adhered these images on the card base using foam tape. Then, I added glossy accent on Bee's wings and cap to give some texture (though it's not visible in the pic). Did some doodling too.. :)


Added handwritten and stamped sentiment along with some gold sequins to complete this card.

I hope you like it.

Thank you so much for stopping by!!

Hugsxx

Deepti Aggarwal

Saturday, 17 October 2020

Rolling by to say Hii....InkyStamper Stamps

Hello Everyone,

I'm rolling by to say a big  Hiiiiii..... 

Have you ever heard about "Pill Bugs"???  Yes??? No..??? I'm asking because in today's card, I am featuring  one of these bugs from InkyStamper  And for Me... this was the first time I heard about them and I really need to google to know more about these cutie bugs :) .. If you want to know more about them then check this Wikipedia link .

Over to my card...I made this one layer Fall card using  InkyStamper stamp set called "Roly Poly"  and did no-line coloring. I really like this cutie Roly Poly bug. Isn't he cute??

Roly Poly hello card

To make this card, I took A2 size water color card stock and stamped this Roly Poly bug using "Antique Linen" distress ink as I was planning to do no- line coloring. After that I stamps these leaves from InkyStamper "Owl" stamp set by masking them.

Pill bug water colored fall card

I colored stamped images using Gansai Tambi water colors. Once done, I stamped the sentiment using  Nuvo Ink - Black Shadow . Then I mounted this on Kraft card base.

No - line coloring on pill bug card

I hope you like it. Thank you so much for stopping by!

Hugsxx
Deepti Aggarwal

Playing along with:

Shimmery Christmas Card - Hedgehog Hollow October Subscription Box

Hello Everyone, I’m so excited to be back at The Hedgehollow blog with my second post using October month Subscription box . Have you ever tried Glitter Paste on your cards? It's so much fun and the results are just awesome. Today I'm sharing super shimmery Christmas card using SILVER Glitter Paste. 

Christmas Card  with Glitter paste

You can try this fun technique using any Glitter Paste you have in your stash. I have step by step video tutorial too for this card, head over to my YouTube channel  to watch it..


To start with I took perfect blend White card stock which came in to the box and Distress inked the background using Pine Needles Distress Ink and Mowed Lawn Distress Oxide. Once I was done with blending, I splattered it with water to add interest.


After that I took the Mandala stencil and secured it on the inked card panel using tape. I applied Silver Glitter Paste generously over the stencil till I was satisfied , removed the stencil and let it air dry.


Once it dried completely, I adhered it on white card base. For the sentiment, I die cut out a circle on vellum and stamped the sentiment from "Around Winter" Stamp set using Color Hive – Clear – Hexagonal Embossing Glue Ink Pad and then heat embossed it using Papermania Silver Embossing powder. I glued this vellum at the center of the card panel using Ranger's Glossy Accent.


Then, I glued Silver thread along with a small bow and converted this die cut out stamped vellum in to a Christmas Bauble :). 
Finally, I added some Silver Star Confetti's to complete this card. I really like how it turned out. I hope you like it too.


Don’t forget that you can share your projects on The Hedgehog Hollow Box Facebook group as well as Stamping at the Hedgehog Hollow Facebook group. We would love to see what you are creating with this wonderful box. If not then you can shop your Hedgehog Hollow box now.

Thank you so much for joining me today . I’ll be back here soon.

Hugsxx
Deepti Aggarwal

Playing along with:

Friday, 16 October 2020

Crealies - Spinner wheel interactive card

Hello Everyone,

I'm stopping by to share this "Spinner Wheel" winter card using Crealies newly launched dies. I really enjoyed playing with this fun interactive dies. With single dies either you can make it reveal wheel or spinner wheel card. I've already made reveal wheel card  which you can find here. In this post I am sharing spinner wheel card.


To make this card, I first made the spinner mechanism where I stamped the top panel with snowflakes stamp set. . Please follow Mandy's YouTube video to make the spinner mechanism. She has explained it so beautifully.


The only difference which I made is that instead of putting transparent sheet , I added die cut out circle where I adhered all the snowmen which I stamped, colored with alcohol marker and fussy cut.


Finally, I added stamped sentiment on die cut out circle  and adhered it at the center using foam tape along with some silver sequins to complete this card.

Here is small video to show the mechanism..:)


I hope you get inspired.
 
Thank you so much for stopping by!!

Hugsxx
Deepti Aggarwal

I have used following Crealies products:

Crealies Dies / Stansen:

Crealies Stamps / Stamps:
                 
       Stamping cardstock, white 240 grams (20x A4)         
      

Sunday, 11 October 2020

Traditional Christmas Wreath Card - Hedgehog Hollow October Subscription Box

Hello Everyone, I’m so excited to be back at  The Hedgehog Hollow blog with my fi rstpost using October month Subscription box . This box is featuring exciting products from Maker forte. And it’s just perfect if you are looking forward to mass produce your Christmas/Winter cards to build your stash.

For today’s card, I went totally traditional and chose to work with the “Around Winter” stamp set to make this Christmas wreath card. This stamp set includes two wreaths and is full of beautiful sentiments.


I started with white card stock and stamped the bigger wreath using Color Hive – Clear – Hexagonal Embossing Glue Ink Pad and then heat embossed it using Papermania Gold Embossing powder.


After that I die cut out the inside of the wreath using circle die and fussy cut the outside to add some interest but if you are mass producing these cards then you can simply die cut it out using any circle dies to save your time. Then, I inked this gold embossed wreath using Tim Holtz Distress Inks. I’ve used ‘Pine Needles’ Distress ink for Green color and ‘Barn Door’ for Red.


Meanwhile, I took white card stock and dry embossed it using Crafter’s Companion’s vintage Snowflake Flutter embossing pad though you can use any embossing background :). The purpose of adding the texture at the background is add some interest.



For the sentiment, I die cut out a circle on vellum and heat embossed the ‘Joyous Noel” sentiment using gold embossing powder.



Time to assemble this card… First, I adhered the dry embossed panel on A2 size red colored card base. After that I glued vellum sentiment behind the wreath and then adhered this wreath on the front panel of the card using foam tape. I cut the extra part of the wreath which was coming out the card stock with scissors.



Finally, I added the twine and decorated the wreath by some red gemstones to complete this card. I hope you get inspired.


Don’t forget that you can share your projects on The Hedgehog Hollow Box Facebook group as well as Stamping at the Hedgehog Hollow Facebook group. We would love to see what you are creating with this wonderful box. If not then you can shop your Hedgehog Hollow box now.

Thank you so much for joining me today . I'll be back here soon.

Hugsxx

Deepti Aggarwal ( Blog | Facebook Instagram | YouTube )



Saturday, 10 October 2020

Crealies - Reveal Wheel Interactive Card

Hello Everyone,

I'm stopping by to share this "Reveal Wheel" birthday card using new Crealies products. I really enjoyed playing with this fun interactive dies. With single dies either you can make it reveal wheel or spinner wheel card. Here I made reveal wheel card where you turn the wheel to reveal the sentiment.


To make this card, I first made the reveal wheel mechanism. Please follow Mandy's YouTube video to make the same. She has explained it so beautifully.


Then, I adhered this reveal wheel mechanism on approx. 4 by 6 inches white card base where I die cut out the semi circle exactly at same place as of the mechanism.


To decorate the front panel, I first added the layers using on the edge dies. Then, I stamped this cute penguin on white card stock, colored it with alcohol markers and fussy cut it. I die cut out lots of balloons using newly launched double stitched balloon dies and also some tiny flowers using flower decorette dies on colored card stock.


After that I glued penguin and all the balloons and flowers to create this beautiful scene. I doodled some leaves for the flowers and added white gemstone to beautify the flowers. Added some punched tiny butterflies to complete my card.

Here is small video to show the mechanism..:)


I hope you get inspired.
 
Thank you so much for stopping by!!

Hugsxx
Deepti Aggarwal

I have used following Crealies products:

Crealies Dies / Stansen:

                 
  On the Edge dies no. 43, 2x Snow/Hill with stitchline 
    Stamping cardstock, white 240 grams (20x A4)      
      
Related Posts Plugin for WordPress, Blogger...